HDAT2 - 100% HDD Bad Sector repair [ENG] Crack/Serial/Keygen
HDAT2 is program for test or diagnostics of ATA/ATAPI/SATA (SATA with NCQ) and SCSI/USB devices. It will not execute in a DOS session under Windows. You should make a DOS boot floppy disk or CD-ROM and boot your system for it and execute this program from that floppy disk or CD-ROM. HDAT2 program has 2 levels: * Drive level testing - main function is testing and repair (regenerates) bad sectors for detected devices - you get many information about detected devices * File level testing - read/find/check items (MBR, boot, directories, etc.) of file system FAT12/16/32 - check/remove (regenerates) bad sectors records, flags in FAT table Development of real mode versions of HDAT2 is finished/stopped. Features: * fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay * device access with interrupt 13h, direct via ATA ports, with ASPI drivers * detects ATA/ATAPI/SATA/SATA with NCQ devices with on-board and add-on controller cards * detects USB devices via USB ASPI driver only * detects SCSI hard drives via INT13h or ASPI drivers * other SCSI devices are detected via ASPI drivers only (must be loaded before); with ASPI drivers you got more informations about SCSI devices * test and repair device for bad sectors * many different test-functions for hard drives * resize hard drives which supports SET MAX ADDRESS/EXT (supports 28/48-bits LBA addressing modes) * drive lock detection via security feature (Security Menu) * S.M.A.R.T. functions for ATA/SATA and SCSI/USB drives only * informations about devices (ATA/ATAPI, INT13h, ASPI) * sector viewer for devices (also for ZIP, CD-data discs) * to access ATA/SATA CD-ROM drive you don't need any driver or MSCDEX * enable/disable some features for direct-access devices * Device Configuration Overlay (DCO) feature set (you can restore a full capacity or allow/disallow some feature sets of hard drive)
|
|||